How much does a sawmill cost?

A sawmill costs from $259.99 for a chainsaw mill to about $14,000 to $25,000 for a Lucas Mill swing-blade sawmill at Bailey’s list prices, and an industrial system is quoted per configuration. The price follows the logs you cut: their diameter, their length and how many you saw.

A sawyer milling a long beam on a Lucas Mill set up over the log in a forest clearing

By Bailey's sawmill team · Updated · 6 min read

Sawmill prices by class

The table below shows what each class of mill costs at Bailey’s. Lucas Mill prices are as printed on Bailey’s price list; chainsaw mill prices come live from Bailey’s store. Prices can change, and your quote confirms the figure.

Sawmill prices at Bailey’s
ClassWhat it isPrice at Bailey’s
Chainsaw mill: Granberg Alaskan MKIVA frame and rails that clamp to your chainsaw’s bar; you supply the saw$259.99 to $429.99 at Bailey’s store
Chainsaw mill kit: Granberg MKIV CompleteMKIV mill, double-ended bar, a loop of ripping chain, helper handle, auxiliary oiler and slabbing brackets; 30 to 60 in$989.99 to $1,489.99 at Bailey’s store
Lucas Mill 6-16 swing-blade16 hp Vanguard V-twin; 14.5 ft standard cut length (3 ft corner extensions sold separately, to 20 ft)$13,999, as low as $289/mo with financing*
Lucas Mill 6-18 swing-blade18 hp Vanguard V-twin$16,999, as low as $351/mo with financing*
Lucas Mill 7-23 swing-blade23 hp Vanguard V-twin$19,999, as low as $412/mo with financing*
Lucas Mill 8-30 swing-bladeKohler EFI V-twin$22,999, as low as $474/mo with financing*
Lucas Mill 10-30 swing-bladeKohler EFI V-twin, the largest single cut in the range$24,999, as low as $515/mo with financing*
Lucas Mill slabbing attachmentTurns a Lucas swing-blade mill into a slabber$2,499.99, as low as $52/mo with financing*
Lucas Mill DSM-23 dedicated slabber60 in complete; 76 in complete$15,799; $16,549, as low as $326/mo with financing*
Lucas Mill DSM-23 trolley only60 in; 76 in$10,759; $11,549
Lucas Mill DSSM dedicated super slabber108 in complete$23,599, as low as $487/mo with financing*
Industrial sawmill systems (Wood-Mizer, Wravor)Headrigs, edgers, resaws, debarkers and handling, built as a lineQuoted per configuration

*“As low as” monthly payments are estimates for business-purpose purchases, based on the listed price, for buyers who qualify through Bailey’s financing partner, subject to credit approval. Your payment depends on your credit, term and down payment; taxes and shipping are extra.

Chainsaw mills: the lowest cost of entry

A chainsaw mill is the least expensive way to make boards and slabs. A Granberg Alaskan mill bolts to your chainsaw’s bar and rides on a rail or on the flat face of the log, so the saw you already own does the cutting. The mill sizes by bar: Granberg publishes a cut up to 20 in wide for the 24 in MKIV and up to 32 in for the 36 in MKIV, and the width you get depends on the bar you fit.

The kit costs more than the bare mill because it includes the parts you would otherwise buy one at a time: the double-ended bar, ripping chain, the helper handle for the nose end, an auxiliary oiler and slabbing brackets for the first cut.

What the price doesn’t include is the saw. Granberg names a minimum power for each mill size, from 50cc for the 24 in MKIV to 120cc for the 56 in and wider. If you need a saw to run on the mill, see the milling saws on Bailey’s Husqvarna site (opens in a new tab). For the mills themselves, see our Granberg chainsaw mills.

Swing-blade sawmills: lumber where the log lies

A Lucas Mill is a portable swing-blade sawmill: one circular blade that cuts vertically, then pivots and cuts horizontally, so boards come off without turning the log. You set the mill up over the log, so there is no log loader to buy for the mill itself.

The five models differ by engine and by the board a single pass can cut. Lucas Mill publishes these maximums:

Lucas Mill cut sizes and prices
ModelSingle cut, maximumDouble cut, maximumPrice at Bailey’s
6-166¼ × 6¼ in6¼ × 12½ in$13,999, as low as $289/mo with financing*
6-186¼ × 6¼ in6¼ × 12½ in$16,999, as low as $351/mo with financing*
7-237⅞ × 7⅞ in7⅞ × 15⅞ in$19,999, as low as $412/mo with financing*
8-308½ × 8½ in8½ × 17 in$22,999, as low as $474/mo with financing*
10-3010 × 10 in10 × 20 in$24,999, as low as $515/mo with financing*

Cut sizes as published by Lucas Mill. A double cut is one pass from each side of the board. *“As low as” monthly payments are estimates for business-purpose purchases, based on the listed price, for buyers who qualify through Bailey’s financing partner, subject to credit approval. Your payment depends on your credit, term and down payment; taxes and shipping are extra.

If you mill wide slabs as well as dimensional lumber, the slabbing attachment adds slab cutting to the swing-blade mill. If slabs are the main job, the dedicated slabbers (DSM-23 and DSSM) are built for it. See Lucas Mill sawmills and slabbing mills.

Industrial sawmills: quoted per configuration

An industrial sawmill isn’t one machine. It is a headrig plus the machine centers around it: a debarker, an edger, a resaw or multirip, trimming and the decks and conveyors that move wood between them. That is why there is no single price. The quote depends on:

  • the log diameters and lengths you’ll saw and the species
  • the products you want out: cants, boards, ties or pallet stock
  • which machine centers you need now and which you add later
  • how logs and lumber are handled between machines
  • the electrical supply and site layout

Bailey’s quotes Wood-Mizer and Wravor industrial systems. See industrial sawmills to compare headrigs and lines, or read edgers, resaws and debarkers explained for what each machine center does.

What else to budget for

The mill is the biggest cost but not the only one.

  • Chain or blades. A chainsaw mill needs ripping chain, and spare loops save a trip in the middle of a log. Granberg’s own guidance is that a new ripping chain cuts around 600 board feet before it needs sharpening. A swing-blade mill needs blade sharpening and spare teeth.
  • The saw. For a chainsaw mill, the saw is the engine. Budget for one with the power your mill size calls for.
  • Transport. A Lucas Mill breaks down into parts for moving: Lucas Mill lists the 8-30’s carriage at 168 kg (about 370 lb), its tracks at 66 kg and its end frames at 81 kg. Plan how you’ll move it and the lumber.
  • Site prep. A level, cleared spot for the log and room to stack and sticker the boards.
  • Power and handling for industrial lines. An industrial line needs the right electrical supply, a foundation or pad, and log and lumber handling. Your quote covers what the configuration needs.
  • Safety gear. Eye, ear, head and leg protection for the saw operator and anyone helping.

Financing is available: see financing.

How to choose by the logs you cut

Start with your logs, not the price list.

  • A few logs a year, boards and slabs for your own projects: a chainsaw mill, sized to the widest log you’ll cut. See how to use an Alaskan chainsaw mill.
  • Regular milling of dimensional lumber, beams or posts, often where the tree falls: a swing-blade mill. Choose the model by the widest board you want in one pass. Compare swing-blade and band sawmills.
  • Wide slabs for tables and counters: a slabbing attachment, or a dedicated slabber if slabs are the main product.
  • Lumber as a business, measured by the shift: an industrial system, quoted for your log mix.

To estimate what a log will yield, try the log scale and board foot calculator.

Questions sawyers ask

Anything else, call a specialist at 1-888-465-8227.

How much does a portable sawmill cost?

At Bailey’s, a Lucas Mill portable swing-blade sawmill is $13,999 for the 6-16 up to $24,999 for the 10-30, as printed on Bailey’s price list. A Granberg Alaskan chainsaw mill costs much less, but you supply the chainsaw. Prices can change; your quote confirms the figure.

What is the cheapest way to start milling lumber?

A chainsaw mill such as the Granberg Alaskan MKIV. It uses a chainsaw you may already own, and Bailey’s MKIV Complete kit adds the bar, ripping chain, helper handle, auxiliary oiler and slabbing brackets in one package.

Why don’t industrial sawmills have a list price?

An industrial sawmill is a line of machines, a headrig plus edgers, resaws, debarkers and handling, sized to the logs and products of one mill. Bailey’s quotes Wood-Mizer and Wravor systems per configuration.

Does the slabbing attachment fit every Lucas Mill model?

Bailey’s offers a Lucas Mill slabbing attachment for the swing-blade models at $2,499.99 on its price list. Ask a specialist for the kit that matches your model.

Can I finance a sawmill from Bailey’s?

Yes. With financing, estimated payments start as low as $289/mo on a Lucas Mill 6-16 for business-purpose purchases, subject to credit approval; your payment depends on your credit, term and down payment. See Bailey’s financing page for how to apply.

Talk to a sawmill specialist

Tell us about your operation and the equipment you're interested in. A Bailey's sawmill specialist will get back to you.

Fields marked optional can be skipped. Everything else helps the specialist quote the right setup.

More about your job (optional)

Interested in financing?
Best way to reach you

We use your details to answer this request. See Bailey's privacy policy and terms.

Industrial Sales Group

1-888-465-8227

Lucas Mill portable and slabbing mills, Granberg chainsaw mills, and industrial sawmill systems.

Equipment Financing

Financing is available on sawmill equipment. See the options or apply online.

Prefer email? sales@baileysonline.com